Customize Windows 7 Installer Using "RT Se7en Lite"

One of the free software that can be used to customize the installer windows 7 is RT Se7en Lite (freeware). This software can be used to make the installer windows 7 to be more streamlined by removing windows components that are not needed or it could be to create a bootable CD installer windows 7

Some display RT Se7en Lite can u see below:

- Display front page RT Se7en Lite




- Customize Display



In order for this software can be used, computer has been installed:

# WAIK - Windows Automated Installation Kit (AIK) for Windows 7
# DOT NET Framework 3.5

To download the software customized windows 7 visit rt7lite.com

To conduct customized on windows XP, can use customized software installer windows xp, while for windows vista users can use customized software windows vista installer

7:02 PM | 0 comments | Read More

Verifying Active Directory in Windows XP

Active Directory Service stores information about users, groups, domains, and other network specific data. To determine which users have access to certain programs within the network requires a special parameter. Windows 2000 users can directly access the search window, but in Windows XP this window is hidden. To remove it, click 'Start | Run' and enter the command below...

rundll32•dsquery,OpenQueryWindow

Previously you need to enable Active Directory services. If not, you'll only get an error report

8:16 PM | 0 comments | Read More

Reading Linux Partitions in Windows

Windows Users who also operate a Linux partition side by side with Windows usually have to make a third partition that both systems can exchange data. This should be done because Windows does not recognize the Linux partition that is formatted with Ext2 file system. By installing a driver for free, you can teach Windows to read ext2 partitions.

Download "Ext2 Installable File System for Windows' from www.fs-driver.org. After the installation process is complete, you can access the Linux partition with all Windows applications. You get a drive letter if necessary you can change through the '-IFS Drives "in Control Panel.

Tip: If at any point you run out of places in the Windows partition, move the swap file to a Linux partition. For that, right click 'My Computer' and open 'Properties'. In the tab 'Advanced' find the 'Settings' under 'System Performance'. Then click 'Advanced' and 'Change'. Now you stay moving swap file to the Ext2 partition.

8:13 PM | 0 comments | Read More

Backup DATA With VB SCRIPT

These are tips for Backup File / DATA with VB Script
follow these steps:
1. Determine folder will be backed up, we can create a special folder to move all data files / essential data to the folder, for example I specify in the C: \ my data.

2. Make the target folder for these backups, for example D: \ Backup.
Keep backup folder or drive are on a different partition so that if there is damage to one drive / partition then we still have a backup of data on the drive / partition other.

3. Click Start> Run and then type notepad.
4. On the worksheet notepad type command as follows:

Set FSO = CreateObject ( "Scripting.FileSystemObject") fso.copyfolder "C: \ my data", "D: \ Backup" done = MsgBox ( "Done", vbOKonly, "Process Data Backup")

The first line is a variable setting, the second line shows the copy folder from source to the target folder. You can switch to another folder for your needs. The third line tells that the backup process has been completed.

5. Then save the program by selecting File> Save as

6. then specify the folder where you save it, or direct you save on Select Desktop.All Files on Save as type. Give your name as you wish files ending with *. vbs, for example Back.vbs.

7. Now try running the program on the desktop Backup.vbs by double clicking. If you find a message "done" that means the backup process has been completed.

6:48 AM | 0 comments | Read More

Tips Disable Copy Paste File

Here are tips fo Disable Copy Paste File :
- Click Start>> Run>> type Regedit and then OK or ENTER.
- Click HKEY_LOCALMACHINE \ SYSTEM \ CurrentControlSet \ Control
- Right click on the Control select New>> Key and give it the name "StorageDevicePolicies" (without the quotes)

- Right-click on StorageDevicePolicies then select New>> DWORD Value and give name "WriteProtect" (also without the quotes).
- Then double click on the WriteProtect, then change the value data to 1.
- Then Restart your Computer / Laptop.
- Finish

Note : If you want to return to its original state, change the value data to "0".

6:42 AM | 0 comments | Read More

Lock Files and Folders With "Easy File Locker"

Each user must have the data / files that may be important not one knew about, let alone any company data or other important data. If we use the computer used by someone else then let the data / important files without protection is extremely risky because others might be able to find and open the data / file and the consequences will be fatal.

In connection with this, we can use applications that can help protect the files or folders that contain these important data. Applications for this purpose is not difficult to find in the Internet applications that are either free (freeware) and are paid. For a thin pockets, do not worry for not getting a pretty good freeware.

And one of freeware that can be utilized for this purpose is Easy File Locker. Easy File Locker is a freeware security that we can use to protect files or folders including subfolders that contain important data ours. With the freeware, a person will not be able to open, read, modify, delete, move, or copy files that we have previously key. Even the files that we have to hide with this freeware will not be seen by others or by using the program / application whatsoever.

- Accesable, with this option, a file / folder will be accessible by others.
- Writable, with this option, a file / folder will still be writable by others.
- Deletable, with this option, a file / folder will still be removed by others.
- Visible, with this option, a file / folder will still be seen by others.

Another advantage, Easy File Locker is able to walk (protect) files / folders computer in Safe Mode. In addition, at least still think his claim develover, freeware sized lightweight enough to ensure no change or even destroy files / folders are protected. We do not need to worry if this will aggravate freeware system.

Download Easy File Locker Here

6:21 AM | 0 comments | Read More

Eliminating User Name from Start Menu

By default, each of us to open the Start menu then we will see the user name that we use to login to appear at the top menu. If you want, we can remove the user name by using the windows facility, gpedit.msc.

The steps are as follows.

First, run gpedit.msc by clicking the [Start] [Run]>> then type "gpedit.msc" (without the quotes) to get a window group policy editor.

Second, click User Configuration \ Administrative Templates \ Start Menu and Taskbar \

Third, in the right pane, double click on "Remove user name from Start Menu"

Fourth, then will appear the window "Remove user name from Start Menu Properties"

Fifth, select the option "Enabled" and then continue with the "Apply" and or "OK".

Sixth, close the windows group policy editor

Seventh, completed
Now, try to click on the Start menu and make sure the user name it has not appeared again.

6:17 AM | 0 comments | Read More

Tip for Speed Internet Connection

By default, for Internet connection, Windows limit up to 20% of the total bandwidth. With these conditions is still possible to speed up Internet connection by reducing the limit or even empty. Follow these tips one speed internet connection in addition to other tips.

The steps are :

Click Start>> Run>> and type gpedit.msc followed by pressing OK or ENTER key will display a window to a group policy editor.

Then click Computer Configuration>> Administrative Templates>> Network>> QoS Packet Scheduler>> until it looks like below.


Then in the right column double click "Limit Reservable bandwidth" to get a window Properties Limit Reservable bandwidth, such as below:


Then select enabled and the Bandwidth limit (%) content with a minimum value or zero if necessary.
Then press the OK or Apply.
Restart your PC or laptop.

6:08 AM | 0 comments | Read More

How to create a Virtual Memory

We often work while listening to music. Or even while running other applications in order to save time. Running applications simultaneously can cause the computer to "run out" memory. We often find that computers have what is called the "low memory" where the remaining memory capacity is low.

There are ways other emergency we can do that is by way of a Virtual Memory, a technique in which the operating system will allocate part of the contents of hard disks to be added to the computer memory. Allocation of part of the contents of your hard drive is called Paging File.

Here are the steps to create a Virtual Memory :

First, click Start>> Control Panel>> System that will appear the window "System Properties".

Second, click the tab "Advanced" and then on the box "performance", click the settings to get a window "Perfomance Options".

Third, in the window "Perfomance options", select the tab "Advance".


Fourth, then the box "Virtual Memory", click "Change", then will appear the list of disks in our computers, like the screenshot below.


Fifth, then select a drive to the Virtual Memory which we will create. Please choose a different drive with the location of the drive system. Then click on "Custom Size".


Sixth, fill in the Initial size value and the Maximum size in MB. As a guideline, for the Initial size value, 1.5 times the RAM capacity. As for the value of Maximum size, RAM capacity multiplied by 3.

For example, suppose that our RAM capacity is 512 MB, then the value of the Initial size is 756 MB, for maximum size is 1512 MB.

Seventh, make sure there is free space on the hard drive to accommodate the virtual memory that we make it.

Eighth, and then click OK

5:52 AM | 0 comments | Read More